Publicidad
Idiomas disponibles
Idiomas disponibles
3
Wired remote controller
This remote controller can control the operation of up to 8 indoor units.
■
Before Use
Operate the remote control according to the following procedure
when it is used for the fi rst time or when the settings are
changed. Pushing the [
ON/OFF] button starts running the
air conditioning unit with the settings made on the remote
control from the next time.
Preparation
Turn on the circuit breaker.
• "
Setting" appears on the display of the remote control when
the power is turned on.
* When the power is turned on, it takes about 5 minutes
before the remote control becomes operable. This is not a
malfunction.
1
2
3
1
[
MONITOR] button
Displays the monitoring screen.
2
[
MENU] button
Displays the menu screen.
3
[
CANCEL] button
Functions as indicated on the screen, such as
returning to the previous menu screen.
4
∧
[
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
13-EN
01_OM_1115653833_EN.indd 7
01_OM_1115653833_EN.indd 7
12:00
75
F
Cool
Mode
Fan Speed
12:00
75
F
Cool
Mode
Fan Speed
6
7
8
4,5
5
[
∨
] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
6
[
F1 ] button
Varies its function according to the setting screen.
7
[
F2 ] button
Varies its function according to the setting screen.
8
[
ON/OFF] button
– 7 –
Switching between the normal display and detailed display
Push and hold the [
CANCEL] button and [
switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
12:00
82
F
Cool
Mode
Fan Speed
Detailed display mode
Room A
12:00
75
F
Cool
Mode
Fan Speed
MONITOR] button at the same time for more than 4 seconds to
(*1)
Energy saving icon
• Displayed when performing the power saving operation of the
air conditioner.
Soft cooling icon
• Shows the air conditioner is performing the soft cooling
operation.
Saving icon
• Displayed when performing operation by suppressing
excessive heating or excessive cooling through automatic
correction of the temperature set point.
(*1)
Icons appear on the screen when the detailed display mode is
selected.
*1 • The "
Preparing to heat" icon appears when the heating
operation starts or when defrosting operation.
The indoor fan stops or the operation becomes the blowing
operation when it is displayed.
• It may be displayed depending on the model when
"
Preparing to operate" is displayed.
14-EN
4/4/2565 BE 11:10
4/4/2565 BE 11:10
Publicidad
