Publicidad
5.2 Firing programs and programming options
5.2.1 Program structure
The furnace offers several types of programs:
a. Programs for Ivoclar Vivadent materials
b. 300 free, individually adjustable programs
b. 300 free, individually adjustable programs on a USB stick
The program types are subdivided into program groups. Each program group consists of 20 programs.
All programs are equivalent and therefore full-fledge programs. For each program, all the parameters can be adjusted.
a) Programs for Ivoclar Vivadent materials (see enclosed Program Table)
When the furnace is delivered ex factory, the Ivoclar Vivadent programs already contain the recommended material para-
meter settings and are write-protected. Consequently, it is not possible to accidentally overwrite the programs.
If required, however, the parameters can be changed and overwritten at any time, if the programs are to be used for other
purposes. Therefore, these programs are also available as individual programs.
In case of software updates, individually changed parameters in Ivoclar Vivadent programs might be reset to the
factory settings or changed!
b) Free, individually adjustable programs
The programs are designed in such a way that they can be either used as conventional, one-stage programs, or as two-
stage programs, if required. The programs and program groups can be individually named.
In case of software updates, individually changed parameters in free programs are NOT reset to the factory
settings or changed!
c) Free, individually adjustable programs on a USB stick
In a first step, a USB stick must be prepared as program memory (see Chapter 5.3). The programs are designed in such a
way that they can be either used as conventional, one-stage programs, or as two-stage programs, if required. The
programs and program groups can be individually named.
In case of software updates, individually changed parameters in free programs are NOT reset to the factory
settings or changed!
5. Funcionamiento y configuración
27
Publicidad
