Vornado VFAN Manual De Instrucciones página 11

CLEANING
Because your Air Circulator moves a substantial amount of air, it will need
regular cleaning. To avoid risk of fire, electrical shock, or injury to persons,
unplug the unit before any cleaning activity.
The motor is permanently lubricated and requires no oiling.
To clean motor cap and inlet ribs: Use a com-
mon household vacuum. Do not use water to
clean these parts of the Air Circulator.
To clean grill: Remove grill (See GRILL RE-
MOVAL instructions) and dust or wash with a
mild dishwashing soap. Do not place grill in the
dishwasher. The excessive heat can remove the
plating.
To clean blade: Wipe with a damp cloth. If
your Air Circulator is used in a greasy environ-
ment, such as a kitchen, mild soap or a common
household cleaner may be necessary. Do not use
solvents.
To clean base: Wipe with a damp cloth.
TROUBLESHOOTING
Problem Possible Cause and Solution
Unit is not plugged in. Plug Power Cord into electrical
UNIT FAILS TO
outlet.
POWER ON
Ensure unit fan speed setting is selected.
Plug fuse has blown. Replace fuse (See USER SERVICING
INSTRUCTIONS on page 5).
Unit is damaged or in need of repair. Cease usage and
unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or
contact a qualified electrician.
Unit set to a low speed setting. Adjust to a higher speed
AIRFLOW IS
setting.
WEAK OR SLOW
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
English 11