Quick SMART CHC Manual De Instalacion Y Uso página 17

SMART CHC
2.0 - INSTALLATION
2.5 - Electrical connetction
WARNING: strictly adhere to the instructions below. Incorrect wiring can cause short circuits, battery explosion, and
damage to the electronics systems.
• Use adequately sized cables based on their length.
• Make sure the cables are not subjected to traction, pressure, or conditions in which they could be damaged.
• Insert a 4A fast-acting fuse on the gauge's power supply line.
• Do not use voltage from the motor or propeller battery unit for the gauge.
• Only provide power to the gauge after having checked the electrical connections.
PIN CABLE COLOUR
1 RED
2 BLACK
3 BLACK/BLUE
4 BROWN
5 GREEN
6 BLUE/RED
7 YELLOW/BLACK
8 YELLOW/RED
2.6 - Example of connection
REMOTE CONTROL
ON/OFF
WINDLASS
FAST
FUSE 4A
SWITCH
BATTERY
12/24V
DESCRIPTION
12/24 V BATTERY POSITIVE TERMINAL
BATTERY NEGATIVE TERMINAL
GYPSY SENSOR INPUT
UP CHAIN SIGNAL INPUT
NOT IN USE (INSULATE)
DOWN CHAIN SIGNAL INPUT
NOT IN USE (INSULATE)
NOT IN USE (INSULATE)
CONTACTOR AND
REVERSING CONTACTOR UNIT
INSTALLATION AND USE MANUAL - REV 001A
WINDLASS
MAGNET
SENSOR
RED
UP BROWN
DOWN BLUE/RED
SENSOR BLACK/BLUE
BLACK
GREEN
YELLOW/BLACK
YELLOW/RED
INSULATE
EN
SMART CHC
CONNECTOR
17