MO-EL 793 Uso Y Mantenimiento página 6

Model 791-791LG 792-792LG 793-793LG
220-240V ~
Power supply
50–60Hz
Total power
Current
Cable H05RN-F
3 x 1.5 mm² 3 x 2.5 mm² 5 x 1.5 mm²
(min.section)
(*) Cable minimum section - per 5 m length.
The models 791, 792, 793, 794, 795 and 796 are intended for indoor use only and
must be kept away from moisture and dust.
The models 791LG, 792LG and 793LG have a protection degree IP65, so they
can be placed outside.
Keep the indicated distances between the heater and the wall/ceiling (fig. 1-2-3).
•
Install the heater in such a way that the lamps stay horizontally.
•
A safety distance of not less than 1 m should always be left in front of the heater.
•
The appliance must not be located neither directly below, nor in front of a socket-outlet.
•
Do not use the heater directly near a bathtub, a shower, a swimming pool.
•
Ensure that the power cable cannot come into contact with the reflector of the appliance
•
and does not intrude into the area of light flux.
Ensure that there is no possibility of inflammable material, combustible material or cur-
•
tains coming into contact with the Heater, or lie near the heater.
Wall mounting using the braket (provided)
Make sure that the wall where you plan to mount the appliance is solid, and free
of electrical cables or water pipes inside.
This heater is intended for permanent installation. Be sure that the heater is not
facing the ceiling or inflammable substances.
Fasten the bracket to the wall by means of 2 dowels at least, passing through the A holes
(fig. 1). Use the B holes just as reference (fig. 1). The heater can be angled on its bracket in
correspondence to the C screw, and the modules can be pointed in correspondence to the
D couplings (fig. 2 ). When the adjustment has been made, tighten all the screws.
Ceiling mounting with chains (not provided)
Fasten the chains (having an appropriate length) to the ceiling, and hook them to the heater
in corrispondence of all the four E holes by means of the "S" shaped rings enclosed inside
the packaging (fig. 3 ).
3. TECHNICAL FEATURES
The infrared Industrial Heaters range is constituted by appliances having one, two, or three
modules. Each module can have a 1500 W or a 2000 W lamp. The lamps of the models LG
(Low Glare) are characterized by having a low brightness (Table 2).
All manuals and user guides at all-guides.com
220-240V ~
50–60Hz
2000 W 4000 W
9 A 18 A
794
380-415V ~
220-240V ~
50–60Hz
50–60Hz
3P+N
3 x 2000 W 1500 W
3 x 9 A 7 A
3 x 1.5 mm² 3 x 2.5 mm² 5 x 1.5 mm²
6
795 796
380-415V ~
220-240V ~
50–60Hz
50–60Hz
3P+N
3000 W 3 x 1500 W
14 A 3 x 7 A
Table 1