Fanimation TRIAIRE SHOWROOM MAD8514 M Serie Manual Del Usuario página 13

How to Assemble Your Ceiling Fan Blades and Cap
1. Secure the three blades using the 3/16˝-24 truss head
screw with spring washer/flat washer through the holes
located on the bottom of the motor assembly. (Figure 1)
NOTE: You will find the fan blade set packed in its
own carton and hardware bag in the fan box.
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
2. Attach the plastic cap assembly to the motor
assembly, which is held in place by a magnet.
(Figure 2)
NOTE: You will find plastic cap in fan blade set carton.
WARNING
To avoid injury to you hand, please be careful when
installing the plastic plate to magnet on the motor
assembly as the strength of the magnet will quickly
attract the cap, causing it to snap down, possibly
pinching or crushing your hand.
Motor Assembly
3/16"-24
Truss Head Screw
with Spring Washer/
Flat Washer
13
3/16˝-24 Truss
Head Screw with
Spring Washer/
Flat Washer
(3 each per blade)
HARDWARE USED:
Plastic Cap
Figure 2
Blade
(not included)
x 9
Motor
Assembly