Publicidad
Idiomas disponibles
Idiomas disponibles
e) The hoods must be installed according to the req uirements in the hood handbook.
f) Should the cooker be installed beneath a wall cabinet, the latter should be situated at
least 70cm away from the hobs as indicated i n figure 1.
g) The cut-out for the cooker cabinet should have the dimensions indicated in the figure
1 .
h) The wall in coontact with the back of the cooker must be of flameproof material.
Cooke Hood
Figure 1
Level ing Your Appliance
Take out of the 4 cooker feet from oven cavity, which be packed together with backing
rack, and then screw them into the 4 plinth in lower part of cooker. These feet level off
the oven when necessary. The height of a cooker can be adjusted by means of adjusta-
ble feet in the plinth. Adjust the feet by tilting the copoker from the side. Then install the
product into position. It is essential thet the cooker be standing level before installation.
Level ing Your Appliance
Take out of the 4 cooker feet from oven cavity, which be packed together with backing
rack, and then screw them into the 4 plinth in lower part of cooker. These feet level off
the oven when necessary. The height of a cooker can be adjusted by means of adjusta-
ble feet in the plinth. Adjust the feet by tilting the copoker from the side. Then install the
product into position. It is essential thet the cooker be standing level before installation.
English-5
Publicidad
