Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
Power supply voltaje and frequency: 220-240V A.C. 50/60 Hz.
The electric cooker without a power supply cable the cooker is designed to operate on
an electricity supply which conforms to the electrical data show non the Rating Label.
The cooker can be connected to the mains only after removing the back panel of the
cooker itself with a screwdriver.
Note: the following installtion procedure must be carried out by a qualified electrician.
For the installation of the feeding cable carry out the following operations:
1. Open the terminal board by insertering a screwdriver into the side tabs of the power
code cover. Use the screwdriver into the side tabs of the power code cover. Use the
screwdriver as a level by pushing it down to open the cover as below:
2. Connect the electricity follows the diagram as printed in the Surface of power code
cover.
3. Fasten the supply cable in the place with the clamp and closet he cover of the terminal
board.
Note: the red electricity indicator on control panel Will illuminate once connect to
electricity.
English-7
Publicidad
