Publicidad
Idiomas disponibles
Idiomas disponibles
Recall Time (Australia and New Zealand only)
Access to additional network services such as "Call Waiting" can be
gained by using the recall button
tones are heard, press
that some networks require only the
network operator for more services information.
If this product is connected to a business PBX system, press the recall
button
followed by the extension number to transfer a call. The
R
standard setting is 100 ms. (600ms for New Zealand)
Troubleshooting
Check that the telephone cord is undamaged and properly plugged
in. Disconnect any additional equipment, extension cords and other
telephones. If the problem is resolved, the fault is with the other
equipment.
Test the equipment on a known working line. If the product works, then
the fault is probably with the line. Please inform your local telephone
company.
No number shown in display when ringing
-
In order for this feature to function, you must subscribe to the Caller
Identification service from your network provider.
-
If a text message is shown on the display, the call may be an
international call (no data received), or from a private or withheld
number.
-
It may not be possible to receive Caller ID information if the phone
operates in a PBX system.
If the telephone still does not work, contact Doro or the place of
purchase. Don't forget the receipt or copy of the invoice will be required
for guarantee purposes.
Declaration of conformity
Doro hereby declares that the product doro PhoneEasy Display 312C
conforms to the essential requirements and other relevant regulations
contained in the Directives 1999/5/EC and 2002/95/EC. A copy of the
manufacturer's declaration is available at www.doro.com/dofc
English
. Example: when the call waiting
R
, listen for the dial tone, then press 2. Please note
R
R
button to be pressed, contact your
Publicidad
