Publicidad
Idiomas disponibles
Idiomas disponibles
Overload protection: 250 V DC and AC RMS
For audible continuity test: When the resistance is between 30
100 , it is likely that the buzzer will or will not sound. When the
resistance is greater than 100 , the buzzer will not sound.
FREQUENCY (Automatic range)
Range
0 MHz ~ 60 MHz
FREQUENCY (Trough the clamp)
Range
50 Hz ~ 1 kHz
CAPACITANCE (Automatic range)
Range
60 nF / 600 nF / 6 µF
60 µF / 400 µF / 20 mF
WORK CYCLE
Range
0,01% ~ 99,9%
For values between 10 % and 90 % work cycle at 50 Hz
6. OPERATION INSTRUCTIONS
VOLTAGE MEASUREMENT
1. Plug the BLACK test probe into the "COM" connector and the RED test
probe into the "V" connector.
2. Set the rotary knob to the voltage position; select the type of voltage
you wish to measure V AC or V DC
3. Connect the probes through the measured source or load.
4. Read the LCD display, the polarity of the RED probe connection will
indicate when a dc measurement is made.
Accuracy
(1% de rdg + 5 dgts)
Accuracy
(1,5% de rdg + 5 dgts)
(8% de rdg + 5 dgts)
Resolution
0,01%
Accuracy
Accuracy
1%
and
Publicidad
