Publicidad
Idiomas disponibles
Idiomas disponibles
3.3 Working position:
v Adjust the height of the handlebar so that you are in an upright position
when using the mower.
3.3.1 To adjust the handlebar length [ Fig. O5 ]:
The handlebar length can be adjusted to your body height.
(16)
1. Loosen both nuts
.
2. Adjust the handlebar
(1)
to the required length.
3. Tighten both nuts
(16)
again.
3.4 To adjust the cutting height [ Fig. O6 ]:
The cutting height can be adjusted from 35 – 65 mm in 4 positions.
3.4.1 To reduce the cutting height:
v Push the button
(19)
and push the handle
height.
3.4.2 To increase the cutting height:
v Push the button
(19)
and pull the handle
cutting height.
3.5 To mow with the grass catcher bag [ Fig. O7 ]:
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v Do not put your hands in the discharge opening.
3.5.1 To put the grass catcher bag into the mower:
1. Lift the protective flap
(17)
.
2. Put the grass catcher bag
Make sure that the grass box is securely connected.
3. Start the mower.
3.5.2 To empty the grass catcher bag:
ö
The level indicator
opens during mowing. When it closes during
mowing, the grass catcher bag is full.
1. When the grass catcher bag
(17)
2. Lift the protective flap
.
3. Remove the grass catcher bag by the handle
4. Empty the grass catcher bag
3.6 To start / To stop the mower [ Fig. O1 / O8 ]:
DANGER!
Risk of physical injury!
Risk of injury if the product does not stop when the start lever is
released.
v Do not bypass the safety devices or switches.
v For example do not attach the start lever to the handle.
3.6.1 To start the mower:
The product is provided with a two-handed safety device (start lever and
safety interlock) to prevent the product from being turned on by accident.
We recommend using only the 4 Ah batteries P4A PBA 18V/72
(Art. 14905) or larger.
We recommend not to use 2 batteries of different capacity.
The battery with the lower state of charge / lower capacity determines the
runtime of the mower.
1. Open the cover
(18)
of the battery holder
(B)
2. Put the batteries
into the battery holder
(20)
into the mower and turn it to position 1.
3. Put the safety key
(18)
4. Close the cover
of the battery holder
5. Push the safety interlock
with the other hand to the handle.
The mower starts and the battery charge status indication
displayed for 5 seconds.
6. Release the safety interlock
14
14638-20.960.03.indd 14
14638-20.960.03.indd 14
(29)
down to reduce the cutting
(29)
upwards to increase the
(8)
into the mower by the handle
(10)
(8)
is full, stop the mower.
(10)
.
(8)
.
(D)
.
(D)
until they audibly engage.
(D)
.
(21)
with one hand and pull the start lever
(P)
(21)
.
3.6.2 To stop the mower:
1. Release the start lever
The mower stops.
2. Turn the safety key
batteries from discharging.
3.7 Hints to mow:
3.7.1 Hints to use the mower:
If grass residue is left in the discharge opening, pull the mower backwards
about 1 m so that the grass residue can drop out downwards.
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes denser if you cut
it frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height. This prevents a possible block-
age of the blade by too much grass residue.
If possible, only cut the grass when it is dry. If the grass is damp, the
cutting pattern will be uneven.
3.7.2 Cutting performance and battery charge:
The lawn area which can be cut on each battery charge depends on
several factors such as moisture, grass density and cutting height. In order
to ensure an optimal use of space, do not turn the mower on and off too
frequently as this severely reduces the battery running time. The cutting
performance for each battery charge can be ideally utilised by increasing
the cutting height and frequent mowing.
The Eco mode reduces the motor speed to 3100 rpm for a maximum bat-
tery lifetime.
3.7.3 Lawn area per battery charge:
2 x System Battery 4.0 Ah
2 x System Battery 5.0 Ah
.
2 x System Battery 6.0 Ah
4. MAINTENANCE
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v Use gloves.
v Wait for the blade to stop.
v Remove the safety key.
v Remove the batteries.
4.1 To clean the mower:
DANGER!
Risk of physical injury!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or solvents.
Some can destroy critical plastic parts.
The airflow slots must always be clean.
v Clean the overside and underside of the mower after each use.
4.1.1 To clean the overside of the mower:
1. Clean the overside with a damp cloth.
2. Clean the airflow slots and the grass box with a soft brush
(do not use sharp objects).
(22)
4.1.2 To clean the underside of the mower [ Fig. M1 ]:
is
1. Lay the mower on its side carefully.
2. Clean the underside, the blade and the discharge opening
a soft brush (do not use sharp objects).
(22)
.
(20)
to position 0 and remove it, to prevent the
max. 350 m²
max. 400 m²
max. 500 m²
(23)
with
25.07.22 11:01
25.07.22 11:01
Publicidad
