STERWINS 20VGSS2-2IN1.1 Instrucciones De Montaje página 220

Idiomas disponibles

in order to respect them all. Ensure temperature during transportation will never be out of

temperature range given on chapter storage.

5.1 TRANSPORT THE MACHINE

Switch the product off and fully charge the battery. Attach blade sheath. Protect the product

from any heavy impact or strong vibrations which may occur during transportation in vehicles.

Secure the product to prevent it from slipping or falling over.

6. WINTERING

Follow all instructions given on chapter storage below. We recommend using the original

package for storage or covering the product with a suitable cloth or enclosure to protect it

against dust.

7. STORAGE

Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to 24°C.

Cover it in order to provide added protection. We recommend using the original package for

storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be

sure to secure the tool while transporting

7.1 STORE THE MACHINE

Illustration 6.1

Shut down the power tool. Examine the unit thoroughly for worn, loose or damaged parts. Clean

the unit before storing. Do not expose the product to sunlight. Make sure the product is always

protected from cold and humidity.

7.2 STORE THE LITHIUM BATTERIES

Illustration 6.1

Please make sure that the battery power level is as recommended in the battery instruction

manual. Please refer to the battery instruction manual for further details.

8. MAINTENANCE

DANGER! RISK OF INJURY DUE TO ELECTRIC SHOCK.

SHUTDOWN THE POWER TOOL BEFORE ADJUSTING, INSPECTING,

CLEANING OR STORING THE PRODUCT.

8.1 CLEANING

Illustration 5.1 to 5.3

It is highly suggested to clean the device after every use. Keep all safety devices, air vents, and

motor housing free of debris and dirt. Wipe up residue with a cloth and/or sponge. Never ﬂush

the tool with water. Do not use cleaning agents, as these can attack the plastic and weaken the

structural integrity of the grass shear.

Clean and lubricate the blades

To ensure many years of efficient and trouble-free operation, blade cleaning should be

performed if sap and debris have built-up, or if you live in an area where the soil is sandy.

Cleaning unusually heavy deposits may require removal of the blade.

219