EN
IMPORTANT! PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE
Thank you for choosing our product. Please take a little time to read the important
safety notes detailed below, as this will ensure many years of happy, safe use.
Battery use instruction and cautions:
When inserting or replacing the batteries, ensure that they are placed in the correct polarity.
•
Do not mix old and new batteries or different types of batteries.
•
Promptly remove depleted batteries.
•
•
Do not short circuit or disassemble the batteries or place into an open flame.
•
Remove the batteries if you do not intend to use the product for an extended period.
•
Do not recharge non-rechargeable batteries.
•
Rechargeable batteries must only be recharged under the supervision of an adult.
Remove rechargeable batteries from the product before recharging.
•
The product requires 3 x 1.5 V AA batteries.
•
•
Do not short circuit the battery terminals
How to install the batteries
1. Ensure that the activity table is switched off.
2. Use a screwdriver to loosen the screw on the battery compartment cover (located on the bottom of the activity table).
3. Insert 3 new 1.5 V AA batteries into the positions indicated on the battery compartment (to ensure optimal
performance, we recommend the use of alkaline batteries).
4. Replace the battery compartment cover and tighten the screw.
Care and maintenance
1. This product contains electrical components. Do not allow the product to come into contact with water or use it in wet
environments. Wipe the surface of the product regularly with a clean cloth to ensure that it stays clean.
2. Avoid direct sunlight and keep the product away from sources of heat.
3. Remove the batteries if you do not plan to use the product for an extended period.
4. Do not allow the product to come into contact with hard objects. Never attempt to disassemble
5. Do not submerge the product in water, and avoid high-moisture environments.
Troubleshooting
If the product stops responding, follow these troubleshooting steps:
1. Turn off the toy.
2. Remove the batteries to disconnect the power supply.
3. Wait for a few seconds and reinsert the batteries.
4. Restart the toy.
Manufacturer's statement
The information in this user manual was checked carefully before publication. In the event of any printing errors or incorrect
content, please do not hesitate to contact us.
Made In China – Bo Jungle - Chamo BV – Brambroek 23B, 9500 Geraardsbergen – BELGIUM
www.bojungle.eu – office@bojungle.eu – Tel: +32 54 240 331 – Fax: +32 9 270 01 80
the product.