Publicidad
Idiomas disponibles
Idiomas disponibles
These next steps are only needed when installing the optional rear facing camera.
12. Using the techniques mentioned earlier, tuck and route the cable in the headliner from the front camera to the mounting
position of the rear camera. The cable will have a label stating which side should be routed to the front of the vehicle. See
Fig. A - D for clarification. NOTE: When routing cables near the side curtain airbag, be sure to route them in a way that
will not impact the airbags' ability to deploy in the event of an accident.
Fig. A
Fig. B
Fig. C
Fig. D
13. Clean and dry mounting location with an alcohol pad prior to mounting camera. Mount the camera on the rear window using
the supplied adhesive on the camera. Keep in mind to not mount camera in a location that will interfere with rear view mirror
visibility. Connecting to the dash cam using the Thinkware smartphone app may be necessary to verify that the picture is right
side up and the entire rear of vehicle is in the frame. See Fig. E and F for clarification.
Fig. E
Fig. F
14. Ensure that any and all of the vehicles trim that may have been removed during the previous installation steps is reinstalled.
These next steps are only needed when installing the interior IR camera.
15. Clean and dry mounting location with an alcohol pad prior to mounting camera. Mount the camera on the front windshield
using the supplied adhesive on the camera. Connecting to the dash cam using the Thinkware smartphone app may be
necessary to verify that the picture is right side up and the entire interior of vehicle is in the frame. See Fig G for clarification.
Connect and secure the supplied cable from the forward facing camera to the interior camera.
Fig. G
16. Ensure that any and all of the vehicles trim that may have been removed during the previous installation steps is reinstalled.
Page 4 of 4
For assistance, please contact Echomaster at fordsupport@echomaster.com or call (866) 766-2267
Publicidad
