Publicidad
Idiomas disponibles
Idiomas disponibles
MSxe/MSx 636 (US) - Buch Seite 6 Donnerstag, 9. Oktober 2003 11:46 11
EN
Do not overreach. Keep proper footing and
balance at all times. Proper footing and
balance enables better control of the tool
in unexpected situations.
Use safety equipment. Always wear eye
protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection
must be used for appropriate conditions.
Tool Use and Care.
Use clamps or other practical way to secure
and support the workpiece to a stable plat-
form. Holding the work by hand or against
your body is unsuitable and may lead to
loss of control.
Do not force tool. Use the correct tool for
your application. The correct tool will do
the job better and safer at the rate for
which it is designed.
Do not use tool if switch does not turn it on
or off. Any tool that cannot be controlled
with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing the tool. Such pre-
ventive safety measures reduce the risk of
starting the tool accidentally.
Store idle tools out of reach of children and
other untrained persons. Tools are danger-
ous in the hands of untrained users.
Maintain tools with care. Keep cutting tools
sharp and clean. Properly maintained
tools with sharp cutting edges are less
likely to bind and are easier to control.
Check for misalignment or binding of mov-
ing parts, breakage of parts, and other con-
dition that may affect the tools operation. If
damaged, have the tool serviced before
using. Many accidents are caused by
poorly maintained tools.
6
MSxe 636 II / MSx 636 II
Use only accessories that are recom-
mended by the manufacturer for your
model. Accessories that may be suitable
for one tool, may become hazardous
when used on another tool.
SERVICE.
Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to
follow Maintenance Instructions may cre-
ate a risk of electric shock or injury.
SPECIFIC SAFETY RULES.
!
Risk of injury
Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire
will make exposed metal parts of the tool
"live" and shock the operator.
!
Risk of injury
Accessories are sharp or have sharp edges.
Handle with care.
Do NOT rivet or screw any signs onto the
power tool, otherwise the total insulation
may be rendered ineffective. Adhesive
labels are recommended.
Use only undamaged plug and cable.
Do NOT work materials which release
harmful substances (e. g. asbestos).
!
Damage to property
Mains voltage must correspond with the
voltage specifications on the power tool.
Use only original FEIN spare parts.
Publicidad
