Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Cleaning The Drain Pump Filter
Warning!
！
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign
matters from the washing.
• Clean the filter periodically to ensure the normal operation of
washing machine.
Open the lower
cover cap
Open the filter by
turning to the
counter clockwise
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled
properly, cap plates should be inserted aligning to hole plates otherwise
water may leak.
• Some machines don't have emergency drain hose, so step 2 and step 3 can
be skipped. Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected
there can be hot water in the pump. Never remove the pump cover
during a wash cycle, always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is securely re-tightened.
1
Rotate 90°C and pull
out the emergency
drain hose, and take
off the hose cap
4
Remove extraneous
2
Emergency
drain hose
5
matter
After water runs
out, reset the drain
hose
Close the lower
cover cap
3
6
V.2
Publicidad
