Technoline WL1028 Manual De Instrucciones página 16

Functions

Time, CO

Multi-colored air quality display

The 24-hour histogram of CO

Backlight function with 4 brightness levels (high – medium – low - off)

Power indication and charging indication of lithium battery

12/24 hours display

°C /°F temperature unit display

CO concentration alarm function
2

Manual baseline calibration and Automatic Baseline Calibration for CO
concentration

Maximum and minimum values of temperature, humidity and CO
concentration recorded

Table standing or wall mounting
Installation

Push the power switch "
elements will be displayed and a signal sound is made. The monitor
enters the normal working mode and 60-second countdown appears on
the screen, indicating that the CO

When using the USB cable as DC power supply, the lithium battery
inside the monitor will be charging. When the DC power is
disconnected, the monitor will switch to the lithium battery as power
source, or it can be start directly with the lithium battery as power
supply. A fully charged lithium battery can last for about 20 hours of
uninterrupted operation.
Note: It is recommended to use DC power supply mostly and to only use the
built-in lithium battery as back-up if needed.
Manual setting
concentration, temperature and humidity display
2
concentration measured
2
" to "ON" to start the monitor, all monitor
sensor is warming up.
2
EN3
2
2