Technoline WL1028 Manual De Instrucciones página 17


In normal display mode, press and hold the "SET" button for 2 seconds
to enter the time setting and the 12/24 hour time display flashes. Press
the "UP" or the "DOWN" button to set the 12 or 24 hour time display.

Press the "SET" button to confirm the setting and the hour flashes.
Press the "UP" or the "DOWN" button to set the hour.

Press the "SET" button to confirm the setting and the minute flashes.
Press the "UP" or the "DOWN" button to set the minute.

Press the "SET" button to confirm the setting and the alarm hour
flashes. Press the "UP" or the "DOWN" button to set the alarm hour.

Press the "SET" button to confirm the setting and the alarm minute
flashes. Press the "UP" or the "DOWN" button to set the alarm minute.

Press the "SET" button to confirm and exit the setting and to return to
the normal display mode.
Notes:

You can also save the setting and exit the setting mode any time by not
pressing any button for 30 seconds.

Press and hold the "UP" or the "DOWN" button for more than 2
seconds to speed up the setting process.
Alarm and snooze function

In normal display mode, press the "SET" button to activate or
deactivate the alarm function.

The alarm clock sounds for 1 minute, if no button is used. You can
touch the "SNOOZE/LIGHT" touch field to enter the snooze function for
5 minutes or press any other button to exit the alarm sound directly.
The alarm will sound again at the same time of the next day until the
alarm function gets deactivated.
Maximum and minimum values

In normal display mode, press the "MEM" button to view the
temperature, humidity and CO concentration data in the following
2
EN4