Technoline WL1028 Manual De Instrucciones página 18

order: maximum recorded values (MAX icon is displayed) → minimum
recorded values (MIN icon is displayed) → currently measured values
(no icon is displayed).

Press and hold the "MEM" button for 2 seconds while viewing the
maximum or minimum values to clear the recorded MIN/MAX data and
start recording again.

The maximum and minimum records will be automatically cleared and
re-recorded daily at 0:00.
Temperature display
In normal display mode, press the "DOWN" button to change between °C
(Celsius) or °F (Fahrenheit) as temperature unit.
CO concentration alarm
2

Press the "ALARM CO2" button to activate or deactivate the CO
function.

Press and hold the "ALARM CO2" button for 2 seconds to enter the
CO concentration alarm setting and the CO
2
flashes. Press the "UP" or the "DOWN" button to set the desired alarm
value.

Press the "ALARM CO2" button to confirm and exit the setting and to
return to the normal display mode.
Notes:

You can also save the setting and exit the setting mode any time by not
pressing any button for 30 seconds.

Press and hold the "UP" or the "DOWN" button for more than 2
seconds to speed up the setting process.
Air quality and ventilation recommendation on the basis of CO
concentration in the air

Your CO
2
monitor measures and displays the CO
2
EN5
concentration value
in PPM with color
2
alarm
2
2