universalblue UCPC9906-22 Manual De Instrucciones página 26

ENGLISH
WI-FI CONECTION
• Use your phone to scan the QR code
or search "Tuya Smart" in Application
on market to download and install the
App. See image 06 on page 5.
• Once the app has been installed open it
and create a new account following the
steps indicated.
• When you are ready to access with your
account open the app and select "add
device" located on the bottom part, or
the symbol "+" (located on the top right
part). See image 07 on page 5.
• Now select your product by clicking
on the fifth category "Small home
appliance" and selecting the product
Heater (Wi-Fi) See image 08 on page 6.
• Select the Wi-Fi network, enter the
password and press "Next" See image
09 on page 6.
• After this step you have to confirm that
the Wi-Fi symbol is flashing rapidly on
the screen of the product. See image 11
on page 6.
• When you connect the appliance the
Wi-Fi symbol should be flashing on the
screen.
• If it does not flash, try unplugging
the appliance and plugging it again.
Then, press the button
seconds until the symbol flashes
rapidly, twice per second.
• If it flashes slowly, please repeat the
process (every time you press this
button for 5-10 seconds it will switch
from flashing slowly to rapidly and
vice versa).
• If it still does not flash after this
process, follow
provided by the app in the section
"Reset the device step by step", or
use the mode "Flashing slowly (this
option is only recommended if the
former does not work)" See image 10
on page 6.
• After completing this step the app will
start linking the device. See image 12
on page 6.
• Whenever the product is detected it will
26
for 5-10
the instructions
show up on the screen and you must
select it to complete the connection.
See image 13 on page 6.
• Once the device has been connected
correctly, select it to start controlling it.
Remarks:
• You can control several heaters at the
same time as if they were just on by
creating a group.
• When device is online, there will be a
green dot at the front of the device icon;
When the device is offline, the dot will
be grey; If is the device shared by others,
there will bedouble loop.
Controls from the APP
Once you have connected your product,
you will be able to use the APP to control
the following functions (See images 14 to
17 on page 7):
• Temperature
• Switch on and off
• Mode
• Lock
• Timer
• Programming
Weekly programming (images 18 to 22 on
pages 7 and 8)
The weekly programming function can
only be activated from the APP. To program
your heater follow these steps:
• Tap "Programming"
• Tap "Add schedule"
• Set the hour and minutes.
• Choose which day or days you would
like the event to work.
• Set which action you would like to
apply, "OFF" the heater will turn off,
"ON" the heater will turn on. Confirm by
tapping "confirm"
• If you have tapped "ON" you will be able
to select the temperature and mode.
• Click on the degrees, select and confirm.
• Click on mode and select between
"High" or "Low" and confirm.
In order to Schedule a switch-on time and
a switch-off time you must add a schedule
with the action "ON" and choose a switch-