Publicidad
Idiomas disponibles
Idiomas disponibles
on time and another schedule with the
action "OFF" and choose a switch-off time.
For example, if you want the heater to
switch on Mondays, Wednesdays and
Fridays at 7:00 and to switch off at 11:00,
you would have to follow this sequence
(See images 23 to 26 on page 9):
• Tap "Programming"
• Tap "Add Schedule"
• Set the hour to 7 and minutes to 00.
• Select the days Mon, Wed and Fri.
• On the Power section set "ON"
• Set the temperature and the mode.
• Tap "Save"
• Tap "Add Schedule"
• Set the hour to 11 and the minutes to 00
• Select the days, Mon, Wed and Fri.
• the Power section set "OFF"
• Tap "Save".
Voice control
You can also voice control your appliance
and the following functions through Google
Assistant and/or Amazon Alexa:
• Temperature:
increase the temperature, lower the
temperature.
• Switch on and off
Note: Visit our YouTube channel to watch
an explanatory video about the Wi-Fi
connection and the APP control.
Operating sound
The appliance emits a beep upon each
operation setting.
"My profile" is where users could manage
personal information. The key informaton
is as follows see picture 13:
• Personal
information:
account name and cellphone number
• Information of shared devices
• Message center
• Entry to submit feedback
• F.A.Q
•
Phone binding: if you sign in with
social network account, you could bind
your phone number with your account
• About
Set
the
temperature,
including
• Add sharing: As shown in the picture,
users could type in a new member's
cellphone
number
device with him. The new member
could control the device with his own
account, see picture 13.
SAFETY SYSTEM
Over-Heat Protection:
• This heater is protected with an over-
heat protection cut-out facility that
switches it off automatically if it over-
heats.
• Overheating
obstruction to the air intakes on the
back
of the heater or the grill on the
front.
• If this occurs please disconnect the
heater from the power
allow it to cool for 30 minutes. Remove
any obstruction and turn the heater
back on.
• The heater should operate normally.
Should the problem persist contact ours
technical service.
Error codes:
• "80": indicates that the temperature
sensor cable is short-circuited.
• "00": indicates that the temperature
sensor cable is off.
• "EE": indicates that the timing button
is pressed.
CLEANING AND MAINTENANCE
Before cleaning always remove the plug
from the electrical socket outlet.
Clean the air inlet and outlet grilles
frequently.
Never use abrasive powders or solvents.
Storage: Store the heater carefully in a
dust-free area during the off season. It
is ideal to store the heater in the carton
it was supplied in. Neatly wind the
cord of the heater to prevent damage to
the cord.
and
share
can be caused
socket and
EN
the
by
27
Publicidad
