Publicidad
Idiomas disponibles
Idiomas disponibles
®
LUBRICATION: GEAR CASE AND BLADES
When you operate with the hedgetrimmer the grease inside the gear case gets
very liquid. The blades bring constantly small quantities of grease between the
blades' touching surfaces to further lubricate. If gear case is not properly lubri-
cated a damage to the gear case itself could happen due to lack of lubrication.
Gear case failures due to improper maintenance are not covered by warranty.
NOTE: In case you operate with your hedgetrimmer in particularly severe con-
dition, high temperature ( over 25°) or for longer period of time, blades and
gear case must be lubricated every two hours.
Lubricate the gear case in the suitable place for lubrication with good quality
oil at lithium base.
STANDARD CLEANING AND WORKING
AMA Garden hedgetrimmer will supply maximum performances only if correctly maintained. Proper maintenance includes
regular check up –blade cleaning from resin and rubber's debris. Blade tightening must be regularly checked.
If you're going to store the hedgetrimmer for a long period of time empty the fuel tank and store the fuel in a suitable container.
Make sure there's no fuel left inside the carburettor. Remove the spark plug and pour minimum quantity of oil inside the cylinder.
Pull once the starting rope.
There could be some oil leaking from the spark plug while you pull the starting
rope.
Always protect your eyes and keep your face away from the spark plug.
Pull softly the starting rope to allow the piston to reach the upper part of the
cylinder.
Insert the spark plug again. Lubricate the blades with some oil. Store the hed-
getrimmer in dry condition and keep it away from heat, sparkles and flames.
All the machines produced by AMA S.p.A. are subject to on-going development; we therefore reserve the right to add possible improvement modifications
to the hedgetrimmer without notice and without up-dating obligations.
STORAGE
BE CAREFUL
AG5 HT 60R - AG5 HT 75R
18
GEAR CASE
LUBRICATING
DEVICE
OIL
Publicidad
