Bresser National Geographic 9070300 Manual De Instrucciones página 35

6. Finally press the SET button to save the settings and
exit the setting mode.
12 Time zone setting
If this weather station is to be used in an area where the
UTC time standard is used (e.g. parts of the UK and Por-
tugal), the time zone can be set manually to -1h UTC. To do
this, follow the next steps.
1. Press and hold the SET button for about 2 seconds to
switch to time setting mode.
2. The year digits flash.
3. Sequence of settings: Year > Month > Day > Time zone
> 12/24 hour mode > Hours > Minutes.
4. Press the SET button until the time zone setting
flashes.
5. Press the DOWN button to change the value to -1.
6. Press the SET button repeatedly until the time setting
mode is completed.
13 Alarm setting
1. Press Press ALARM button to show the alarm time.
2. Press and hold ALARM button for approx. 2 seconds to
change to alarm time setting mode.
3. Digits to be set are flashing.
4. Press UP or DOWN button to change the value.
5. Press ALARM button to confirm and continue to the
next setting.
6. Settings order: Hours > Minutes
35 / 80