Bresser National Geographic 9070300 Manual De Instrucciones página 36

7.
8.
9.
14 Snooze function
1.
2.
15 Temperature alarm setting
1.
2.
3.
4.
5.
6.
7.
36 / 80
Finally press the ALARM button to save the settings and
exit the setting mode.
Press SET button to activate the alarm. The symbol
will be displayed. The alarm is activated.
Press SET button again to disable the alarm. The sym-
bol will not be displayed. The alarm is disabled.
When the alarm sounds, press SNZ button to activate
the snooze function. The alarm will sound again in 5
minutes.
Press any other button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
In normal time display mode, press DOWN button for
approx. 2 seconds to enter temperature alarm time set-
ting mode.
Digits to be set are flashing.
Settings order: ON/OFF (Temperature alarm on/off) >
Temperature highest limit > Temperature lowest limit >
Exit
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
The temperature settings mode will be quit automatic-
ally after 30 seconds of inactivity. All settings done be-
fore will be saved.
When outdoor temperature reaches highest or lowest
limit, the temperature alarm symbol will flash and an
alarm will sound for approx. 3 seonds. This will be re-
peated with an interval of 1 minute until the temperat-
ure has fallen below the limit again.