Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and Storage
Maintenance that is not mentioned in these instructions must be carried out by a
servicing agency authorised by the manufacturer. Only original parts are permitted.
Maintenance
Check and clean your robotic mower regularly and replace worn parts if necessary.
Preferably use a dry brush, a damp cloth or a sharpened wooden piece.Never use
flushing water. Following these maintenance instructions can extend your robotic
mower's service life.
Battery Life
The battery of the robotic mower is maintenance-free , with an estimated life of
more than 1 years (depending on working conditions and user's habits).
Winter Storage
During winter, keep your mower, docking station and power supply in a dry place.
We recommend a shed, garage or preferably store them indoors.
EN
EN
Prepare your device for winter storage as follows:
1. Fully recharge the battery.
2. Set the mains power switch to "OFF".
3. Deeply clean your robotic mower.
4. Unplug the power supply from the mains outlet.
5.Disconnect the power supply from the charging station.
6.Disconnect the boundary wire from the charging station. Lift up the charging
station and clean. The boundary wire can remain outside. However, it is
imperative to protect the wire form corrosion. We recommend a water-free
grease or suitable sealing tape. If available, repack the product in the original
packaging. Alternatively, our service centre offers a winter service for your device,
which include a check-up guide of all parts and a software upgrade.
Original instructions
18
EN
EN
Publicidad
