Troubleshooting
Type
Cannot charge with
charging station
The Mower runs in
circles unusually
Product
The mower is noisy
No response after
pressing START button
Error
and OK button
Original instructions
How to solve
1.Check that the boundary wire in front and
underneath the charger are in a straight
line.
2.Check that whether the charging station's
location is suitable as explained in this
manual.
1.Verify that no power cable runs parallel
and in close proximity the boundary wire.
If necessary, reposition the boundary wire.
2.Check if a front wheel is stuck.
3.If a neighbor has a similar robotic mower,
the signal may be interfered. Try to reset the
signal of the charging station and the mower
to the alternative boundary signal.
4.Driving motor may be damaged, please
contact customer support.
1.Inspect the fixing screw of blades; tighten
if necessary.
2.Inspect and replace the blades if
necessary.
3.Grass may be too high. Try to increase
the cutting height, or mow the lawn with
a traditional lawnmower first.
4.Cutting motor failure, please call after
sales service.
1.Check if the mower has already
completed the programmed working time
for that day.
2.Press the UNLOCK button
21
EN
EN