Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing for spring
After winter storage, please clean the charging contacts on both the mower and
the docking station.
Use a fine abrasion paper or a brass brush， which will help to achieve the best
charging efficiency and avoid any charging interference.
Cleaning the Mower
Cleaning the mower body:
As your robotic mower is battery powered,you should pay attention when cleaning.
Remove rough dirty with a soft brush. Then use a manual water spray with
mild household detergent for intensive cleaning. Last , wipe off any residue
with a moist rag after cleaning .
Cleaning the underside:
Ensure the main power switch is in OFF position. Wearing protective gloves when
handing or working near sharp blades. Turn the robotic mower upside down.
Clean the blade disc and frame using a soft brush or damp cloth. Rotate the
blade disc to make sure that it can move freely.
Clean the contact pins and the charging strips:
Use wire wool, metal cleaner or very fine grade emery paper, clean the contact
pins and the charging strips on your mower and docking station. Remove any
debris, leaves, or grass clippings around the contact pins and charging strips to
ensure efficient charging.
Reversing or replacing the blades:
WARNING! Ensure the robotic mower is completely shut off for any adjustment
or replacement of the blades. Always wear protective gloves.
Original instructions
19
EN
EN
Publicidad
