The angle of the blades can be adjusted by turning the
knob positioned above the squeegee.
Similarly, the height of the squeegee can be adjusted by
raising or lowering the two wheels positioned in front of /
behind the squeegee, turning the relative knobs.
Fitting the Brush/Pad Holder
! ATTENTION: before carrying out the operations
apply the parking brake.
! ATTENTION: Before installing the Pad Holder on the
machine, make sure you have attached the PAD to
the Pad Holder
Fitting the brushes (or Pad Holder):
-
the brushes underneath the housing, making
certain that they rest against the locating stops to
align them with the coupling assembly.
EN
18