ENGLISH
Note: Before installing the appliance:
1. Keep the distances shown in Fig.1.
2. Make the support rail strong and stable.
3. Ensure that the appliance is securely mounted on the support rail.
4. Keep the hanging chain always taut so as not to damage the power cable.
Note: For correct installation:
1. Make sure that the appliance is installed on the supplied mounting carabiners.
2. Make sure that the carabiners are secured to the mounting surface and the rear of the appliance.
Operation
The appliance is equipped with:
- A safety ON/OFF switch located on the top cover near the hook and an overheating protection (See Fig.4).
- A remote control for remote ON/OFF (See Fig.5).
4
5
For correct appliance operation:
1. Set the switch to ON.
2. Operate the appliance using the remote control.
Note: If problems occur, check that:
1. The power cable is plugged into an electrical outlet, if not plug it in.
2. The switch is set to the ON position.
Note: The remote control batteries are not included. Insert 2 AAA alkaline batteries.
15