Descargar Imprimir esta página

Husqvarna 1-10DPS75 Manual De Usuario página 25

Ocultar thumbs Ver también para 1-10DPS75:

Publicidad

Idiomas disponibles

Idiomas disponibles

Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
Make sure that the power supply is disconnected
before transportation.
Make sure that the electrical cable and dust extractor
hose are disconnected before transportation.
Remove the abrasive before transportation.
The wheels let you move the product shorter
distances. For longer distances, lift the product to
move it or put the product on a vehicle.
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
Engage the drive system during transportation. Refer
To engage and disengage the drive system on
to
page 10 .
To move the product manually
WARNING:
are stationary before you move the product.
WARNING:
steel toe-cap and non-slip sole.
WARNING:
up and down ramps manually with the drive
system disengaged. Only move the product
manually on level ground.
1. Disengage the drive system. Refer to
disengage the drive system on page 10 .
2. Push the handle downwards.
3. Push or pull the product by the handle.
4. Engage the drive system. Refer to
disengage the drive system on page 10 . With the
motor off, this has the function of a parking brake
and prevents accidental movement of the product.
2014 - 001 - 07.02.2023
Transportation, storage and disposal
Be careful during
Do not tow the product
Wait until all moving parts
Use protective boots with
Do not move the product
To engage and
To engage and
To move the product with the drive
system
WARNING:
there is a risk of injury if the product falls. Be
careful when you move around the product.
WARNING:
the ground during operation.
WARNING:
forward during operation.
WARNING:
steel toe-cap and non-slip sole.
1. Engage the drive system. Refer to
disengage the drive system on page 10 .
2. Pull down the handle to lift the product from the
surface.
3. Set and adjust the movement speed with the speed
control dial (C).
A
The product is heavy and
Do not lift the product of
Do not move the product
Use protective boots with
To engage and
B
C
D
25

Publicidad

loading