Atlas Copco ETV STR61-50-B10 Instrucciones Del Producto página 11

ETV STR61-50-B10
Tools with scanner accessory
1. Attach the rubber cover on the motor cover of the tool.
2. Attach the clamp rings on the rubber cover.
NOTICE Make sure the clamp rings are oriented with the flange facing the scanner.
3. Attach the yoke ring to the tool by pushing it onto the clamp rings.
NOTICE Make sure the rubber cover and the clamp rings are aligned.
4. Secure the yoke ring with a circlip in the slot of the clamp rings.
EN
© Atlas Copco Industrial Technique AB - 9836 9815 00
Installation
11