Publicidad
Idiomas disponibles
Idiomas disponibles
B. ATTACH CLEANING PADS TO STEAMER
WARNING! To prevent floor damage, ALWAYS attach either the
Microfiber Floor Pad or the Carpet Glider Accessory with Carpet
Pad when using your Floor Steamer. NEVER USE WITHOUT EITHER
OF THESE ATTACHMENTS AFFIXED TO THE MACHINE.
ATTACHING FLOOR PAD
MICROFIBER FLOOR PAD – Place Microfiber Floor Pad
face down on the floor, wide side forward. Hold Floor
Steamer about 2" above Pad and gently place Floor
Steamer on the Pad. Firmly press down to ensure Pad is
adhered to the Floor Steamer.
The metal heat plate on bottom (A) provides extra
heat to the floor pad to soften and remove dirt.
USE ON HARDWOOD FLOORS – For hardwood floors, use
only on "sealed" hardwood surfaces.
Move Steamer forward and backward while cleaning,
carefully observing the amount of steam used, as too
much water could cause damage.
ATTACHING CARPET GLIDER WITH CARPET PAD
Place Carpet Glider face up on floor. Center and place
Carpet Pad on top of Carpet Glider. Hold Floor Steamer
over Carpet Glider and gently lower the Steamer onto
the Glider. Make sure the 4 clips on Glider are around
the outside of the Steamer Base and using hands, attach
the 4 clips of the Carpet Glider to the Steamer Base.
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
*
Steam can cause wax to be stripped from floor, and consequently
damage some varieties of linoleum flooring. ALWAYS test a small,
inconspicuous portion of the floor BEFORE using steam to ensure that
your linoleum floor does not have this issue. For some varieties of linoleum
or vinyl floors the floor steamer is harder to push forward and back.
NOTE: See "Maintenance & Cleaning" for care and cleaning
10
Before Use
A -
Heat Plate on
bottom of Base
boosts the cleaning
performance.
instructions for Microfiber Pads (see pg. 22).
*
Publicidad
