Euroflex vapour M4S Manual Del Usuario página 9

1
FLOOR STEAMER MODE
Assembly of Parts & Preparation of Steamer
Make sure all parts are in the box (see pg 6-7).
IMPORTANT! FOLLOW THESE INSTRUCTIONS CAREFULLY.
WARNING! Always ensure steam switch is off and not
steaming when attaching an accessory to the unit.
A. ATTACH HANDLE TO STEAMER
• Insert the lower Extension Tube into the Floor Steamer
Base and press firmly in place (as shown in Fig. A).
• Insert the upper Extension Tube into the lower extension
tube and press firmly in place (as shown in Fig. B).
• Insert the Handle Extension Tube into the upper extension
tube and press firmly in place (as shown in Fig. C).
• Secure the steam hose (coming from the appliance to
the handle) in the Cleaning Hose Clamp (4).
Attention! The lower Extension Tube has
the cord support pointing down. The
upper Extension Tube has the cord support
pointing upwards.
Fig. A Fig. B Fig. C
(4)
Cleaning Hose Clamp
Before Use
9