Publicidad
Idiomas disponibles
Idiomas disponibles
Identification of Parts
Bottle
Flange
Single Pump Unit
(30.5mm)
Valve
Membrane
Sealing Disc
*28.0mm Flange Insert
Before First Use
IMPORTANT
Before using your breast pump, disassemble, clean and sanitize thoroughly. Always
wash hands well with soap and water before handling your pump.
1
A
B
Remove the pump unit A from flange
assembly B by pulling up on pump unit,
as shown.
4
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
Stand
AC Adapter
Bottle Cap Ring
Diaphragm
* Additional sizes are available
separately. See page 8.
2
C
D
B
Remove diaphragm C and flange insert
D from flange assembly B.
B
G
E
Clean Your Pump Parts: To prevent warping, do not place anything on top of pump parts
during sanitizing, washing, or drying. Do not assemble pump until parts are cool and dry.
TO SANITIZE PARTS ON THE STOVETOP:
Place disassembled pump parts in a pan of boiling water for 5 minutes. Stir frequently.
DO NOT allow parts to rest on bottom of pan as they may melt or become damaged.
TO SANITIZE PARTS IN THE MICROWAVE:
Use Evenflo Feeding Silicone Steam Sanitizing Bag according to instructions.
DO NOT BOIL OR WASH:
AC Adapter
Single
Pump Unit
Before EVERY Use
• Wash your hands with soap and water before handling your pump.
• Ensure parts are clean and dry. Refer to cleaning instructions on page 11.
• Use care when handling the valve/membrane assembly to avoid damage.
• Visually inspect the individual components for cracks, chips, tears, or deterioration. In
the event that damage to the device is observed, please discontinue use until the dam-
aged parts have been replaced.
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
Before First Use
3
Unscrew bottle E and twist valve G to
remove from flange unit B.
Remove membrane H from valve G.
G
H
WARNING
NEVER immerse pump unit or
AC adapter in water or attempt to
sanitize in a microwave oven. Damage
to parts and oven may occur.
5
Publicidad
