Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Breast Pump
B
IMPORTANT
If you feel pain in your breast or nipple, turn the
pump off (see next page) or slide a finger be-
tween the flange and your breast to immediately
break the suction. If you feel discomfort at every
suction level, turn the pump off and contact your
healthcare provider for assistance.
OFF
B
Massage your other breast to stimulate a milk release, as before, and repeat steps 2
through 4. If desired, massage the first breast again and repeat on both sides to maximize
expression.
10
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
3
Turn on the pump by turning the control dial
B clockwise to begin pumping. To increase
suction, gradually turn the control dial clock-
wise to reach the level that is most comfort-
able for you. To reduce suction, turn the
control dial B counterclockwise.
4
Continue pumping until milk is no longer
flowing. Do not fill bottle above the 5 oz/150
mL line.
5
After milk has been expressed from one
breast, turn control dial B counterclockwise
until pump unit is in the OFF position. If nec-
essary, slide a finger between the flange and
your breast to break any remaining suction,
then remove the flange.
6
D
C
E
WARNING
NEVER immerse pump unit or AC adapter in water or attempt to sanitize in a micro-
wave oven. Damage to parts and oven may occur.
To ensure that your breast pump performs well, follow these steps after every use:
• Completely disassemble the flange assembly, see page 4.
• Wipe the pump unit with a clean, damp cloth.
• Rinse the flange assembly (all parts EXCEPT the pump unit and
AC adapter) in cool water to remove milk residue.
• Hand wash with warm, soapy water (approx +30°C / +86°F).
• To prevent warping, do not place anything on top of pump parts during sanitizing,
washing, or drying. Do not assemble pump until parts are cool and dry.
• Rinse thoroughly and air dry before assembly. You may also wash your
flange assembly (after rinsing) on the top rack of your dishwasher (take care not to rest
dishes on top of pump parts).
• Use care when handling the valve/membrane assembly during cleaning to avoid dam-
age. Visually inspect the individual components for cracks, chips, tears, or deteriora-
tion. In the event that damage to the device is observed, please discontinue use until
the damaged parts have been replaced.
1. After sealing your bottle tightly with the sealing disc and cap ring, label the bottle with
the date and time the milk was expressed.
2. Use the chart on the following page as a guide for storing your breast milk for future
use.
Note: In hot weather, chill milk immediately to prevent spoilage.
USA/Canada: 1-855-EFI-BABY (334-2229) • www.evenflofeeding.com
Using Your Breast Pump
Carefully unscrew bottle from pump. Place the
sealing disc C into the cap ring D and screw
securely onto the bottle E.
Your breast milk is now ready for storage.
Note: Information on storing breast
milk can be found on page 11.
After Every Use
Storing Your Breast Milk
11
Publicidad
