Kenwood UBZ-LH68 Manual De Instrucciones página 24

USING CHANNEL SCAN
1
2
Note:
◆
Use the UP key to monitor the channels in the ascending order, or to
change the scan direction to the ascending order. You can use the
DOWN key to monitor the channels in the descending order, or to
change the scan direction to the descending order.
◆
If using the optional SMC-34 Mic, you may press and hold Mic 1 key
in step 1 to monitor activity in the current channel {page 21}.
18
Press the UP (or DOWN) key for
more than 1 second to start Channel
Scan.
• "SCAN" appears.
• To reverse the scan direction,
press the DOWN (or UP) key.
• Channel Scan stops when finding
a channel where a call is received.
The channel number blinks.
To quit Channel Scan, press the PTT
switch.