Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Display option
Display lighting can be adjusted by following this instruction.
using the auto clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with
clean air.
When the air conditioner is operating;
Midea ODM Latin America IB&IM_HP_EN.indd 21
1 . Press the Settings button .
2 . Press the
button until (Display) indicator starts to blink .
3 . Press the SET button to set the display status .
- Press the SET button to turn on/off the lighting display .
• Display option cannot be set when the air conditioner is off.
1 . Press the Settings button .
2 . Press the
button until (Clean) indicator starts to blink .
3 . Press the SET button to set the Auto clean function .
- (Clean) indicator will be displayed on the remote controller display . Auto clean
function will be activated after the air conditioner stops operating .
- Duration of the Auto clean function can be different depending on the previous
operation mode used.
Auto(cool), Cool, Dry mode : 30 minutes.
f Press the Settings button again to make the (Clean) indicator blink and
Cancel
press the SET button .
• When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
English-21
2014/6/11 11:42:37
Publicidad
