Publicidad
Idiomas disponibles
Idiomas disponibles
HELPFUL TIPS
ADD WATER INDICATOR
If the "ADD WATER" Indicator turns on, try the following:
•
Add water to the internal water reservoir.
•
Turn off the unit, add water, and press the Power Button again to restart the unit.
ICE FULL INDICATOR
If the "ICE FULL" Indicator comes on, try the following:
•
Remove all the ice from the basket and press the "ON/OFF" Button to restart the unit.
•
Remove any ice that may be blocking the ice chute with a small spoon.
NUGGET ICE STICK TOGETHER
•
The ice cycle may be too long. Stop the ice maker, then restart it when the ice cubes melt.
•
The water temperature in the water tank may be too low. Change the water in
the water tank. The room temperature should be set between 45˚ F - 90˚ F.
•
Gently tap nugget ice with a fork or spoon to break up clusters.
ICE IS FULL BUT INDICATOR LIGHT IS NOT ON
•
Move the ice maker in a darker location so the infrared
detection inside the ice maker can work properly.
ICE MAKER NOT WORKING
If the ice-making cycle seems to be running properly,
but no ice is being made, try the following:
•
The water temperature in water tank may be too high. Try pouring
colder water (between 45˚ F - 80˚ F) into the water tank.
•
Make sure you are using the ice maker in a room with
an ambient temperature of 74˚F or lower
•
If changing the water or allowing the unit to cool does not work, there may
be a leakage of the refrigerant fluid, or a pipe in the cooling system may be
blocked. Please take your ice maker to a qualified technician for repair.
8
Publicidad
