Publicidad
Idiomas disponibles
Idiomas disponibles
Control Panel
Power Button Soft Ice
CONTROLS AND INDICATOR LIGHTS
•
Power Button: Press the Power Button once to turn on your ice maker.
•
Soft Ice Button: Press the Soft Ice Button to begin making ice.
•
Auto-Clean Button: Press and hold for 3 seconds to begin the auto-cleaning cycle.
•
POWER Light: Indicates when power is on.
•
ICE FULL Light: An infrared sensor in the ice basket helps detect when it is full of ice.
When the "ice full" indicator light is on, it means that ice has filled the ice basket. To restart
production, empty ice from the basket, and the machine will restart automatically.
•
ADD WATER light: When the "Add Water" indicator lights on, the machine will
stop making ice. Remove the water tank, add more water, replace the water
tank, and press the "ON/OFF" Button once to restart ice production.
•
Auto Clean Mode: When in Auto-Clean mode, the power button
and the Auto-Clean button back lights will illuminate.
HOW TO OPERATE
BEFORE FIRST USE
1.
Remove all interior and exterior packaging. If any part or accessory
is missing, please call our customer service department.
2.
Follow the steps under CLEANING & MAINTENANCE before using this unit.
3.
Place the unit on a flat, level surface in a location that is protected from
direct sunlight and other sources of heat (i.e. stove, furnace, radiator). Ensure
there is at least six inches of empty space on all sides of the unit.
4.
Allow 24 hours for the refrigerant fluid to settle before plugging
the cord into an electrical outlet for the first time.
Auto-Clean
Power
Add Water
Ice Full
6
Publicidad
