Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING & MAINTENANCE
Your NUGGET ICE MAKER should be cleaned before first time use and before storing.
Following these steps will help to maintain the unit and add to longevity.
For optimal use, it is recommended to perform these cleaning steps on a monthly basis.
1.
Unplug the unit from the electrical outlet.
2.
Remove all ice and water from the Ice Bin.
3.
Drain water from reservoir using the Train Tube.
4.
Clean the interior and exterior of the Ice Bin with lukewarm
water and a soft cloth. Dry thoroughly.
5.
Wipe the exterior of the Ice Maker with a damp cloth.
6.
If the unit has not been in use for a long time, make sure to completely
drain the water from the internal water reservoir.
AUTO CLEAN
1.
Add a solution of about half water and half white vinegar or
lemon juice to the water reservoir to the max fill line.
2.
Plug the ice maker into the wall outlet.
3.
Make sure the ice maker is not making ice. If it is, press the Power Button once.
4.
Press and hold the Auto-Clean button for 3 seconds.
The backlight on the Auto-Clean button will illuminate, and the Ice Maker will
begin the cleaning cycle. When the cycle is complete, the light will turn off.
5.
Unplug the drain in the back of the ice maker to drain all liquids into a sink or bucket.
6.
Fill the water tank with water up to max fill line.
7.
Repeat steps 2 to 4 approximately 3 to 4 more times. Always
unplug the unit before and during the draining process.
9
Publicidad
