1. Pull the height adjustment lever (7) rearward to
increase the blade height.
2. Pull the height adjustment lever forward to decrease
the blade height.
7.8
INSTALL THE BATTERY PACK
WARNING
•
If the battery pack or charger is damaged, replace
the battery pack or the charger.
•
Stop the machine and wait until the motor stops
before you install or remove the battery pack.
•
Read, know, and follow the instructions in the
battery and charger manual.
1. Open the battery door (8).
2. Align the lift ribs on the battery pack (25) with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment
until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
English
The motor starts only when you put in the safety key
(26).
7.9
REMOVE THE BATTERY PACK
1. Open the battery door (8).
2. Remove the safety key (26).
3. Push and hold the battery release button (24).
4. Remove the battery pack (25) from the machine.
8
OPERATION
Wear eye protection during operation.
8.1
START THE MACHINE
1. Push and hold the start button (1).
2. While you hold the start button (1), pull the bail
switch (4) in the direction of the handle bar.
3. Once the machine has started you can release the
start button (1).
8.2
STOP THE MACHINE
1. Release the bail switch to stop the machine.
11
NOTE
WARNING
EN