WARNINGS AND CAUTIONS
EQUIPMENT MISUSE
• This equipment is for professional use only. Read all instruction manuals, tags, and labels before operating the equipment.
• Do not tamper the equipment.
• Use the equipment only for its intended purpose.
• Install and use the pump following all local and national regulations including all health and safety laws and regulations.
• Use only original replacement parts from Samoa Industrial, S.A.
• Any unauthorised modification to the equipment, misuse, improper maintenance or identification label removal may void
the warranty.
• To avoid accidents, make sure to disconnect the equipment from the air supply when is not being used.
CHEMICAL COMPATIBILITIES AND TEMPERATURE LIMITS
• The use of non-compatible fluids may cause damage in the pump and serious personal injuries. This equipment is not intended for
use with fluids that are listed in section 1 of the Pressure Equipment Directive 2014/34/EU. These fluids are explosive, extremely
flammable, highly flammable, flammable, highly toxic, toxic, oxidizing or those whose vapor pressure is greater than 0,5 bar
(7 psi) above the atmospheric pressure at the maximum allowable temperature.
• The pump generates high or very high pressures. Do not exceed the maximum air inlet pressure of 12 bar (170 psi).
• High pressures can cause very serious injuries to the human body.
• This unit may have stored pressure. Release all pressure and disconnect from any fluid systems before servicing. To ensure the unit
safe operation, all service work should be done by qualified personnel only.
• All fittings in the system connected to the pump outlet must be suitable for the maximum pressure generated by the pump/air
motor. If the system is not designed to withstand the pump maximum pressure, install safety or diverter valves.
SAFETY MEASURES
• Ensure that operators using this equipment are trained on the operation, the product and its limitations.
• Use safety equipment as required.
• User must respect the surface temperature considerations in explosive atmospheres. This manual specifies conditions in this regard.
The ATEX marking states the maximum temperature that the equipment can reach in use, which will depend on the oil and/or
ambient, and must be taken into account.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
EN
R. 03/23 853 802
3