7
INSTALL SOAP DISPENSER
• Insert SOAP DISPENSER SHANK (1) through O-RING (2)
and the deck.
• Thread MOUNTING NUT (3) on to SOAP DISPENSER
SHANK (1) to secure it to the deck.
• Fill SOAP BOTTLE (4) and thread it on to SOAP
DISPENSER SHANK (1).
8
SERVICE
Turn off hot and cold water
supplies before beginning.
If faucet drips, operate HANDLE several times from "off" to
"on." Do not apply excessive force.
Clogged CARTRIDGE outlets or inlets may cause
reduced flow.
• Remove INDEX BUTTON (1), loosen HANDLE SCREW (2)
and remove HANDLE (3).
• Remove the HANDLE CAP (4). Unthread the PLASTIC
NUT (5).
• Lift CARTRIDGE (6) off MANIFOLD (7).
• Clean MANIFOLD (7) and CARTRIDGE (6) ports.
• Place CARTRIDGE (6) onto MANIFOLD (7) and tighten
MOUNTING SCREWS (5) alternately.
• Replace ESCUTCHEON CAP (4), HANDLE (3), tighten
HANDLE SCREW (2) and install INDEX BUTTON (1).
Clogged AERATOR may cause reduced flow:
• Unthread the AERATOR (8) with a coin or flat head
screwdriver and clean it of any debris.
• Allow water to run through the faucet with no aerator to
flush the hoses.
• Reinstall AERATOR (8).
9
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH
CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
8
7
1
2
3
4
3
6
5
2
4
1