Publicidad
Idiomas disponibles
Idiomas disponibles
7. PROBLEM SOLVING
PROBLEMS
- The equipment does not switch
on.
- Machine switch on but when
product touches the blade it
stops or runs slowly.
- Smoke or burn smell.
- Blade breaks frequently.
- Damaged Cord
- Unusual noises.
- Difficulties to cut the product.
CAUSES
- Lack of power;
- Problem with the internal or external
electric circuits.
- Belt slipping on pulleys.
- Damaged motor.
- Problem with the internal or external
electric circuits.
- Dirty Blades or Wheels.
- Damaged Wheel.
- Problem during transportation.
- Damaged bearings.
- Dirty blade or wheels
- Blade with wrong tension
- Blade is not on wheels center
- Blunt blade
CHART 02
- Check if there is electric power.
- Call Technical Assistance.
- Adjust the belt tensions;
- Call Technical Assistance.
- Call Technical Assistance.
- Clean, see item 5 CLEANING.
- Call Technical Assistance.
- Call Technical Assistance.
- Call Technical Assistance.
- Clean, see item 5 CLEANING.
- Adjust the blade tension, see item 4.2.4
- Call Technical Assistance
- Change the blade
SOLUTIONS
7
Publicidad
