SonoSite M Serie Guia Del Usuario página 14

Turn on
display and
adjust angle
Caution:
12 Connecting external display
Adjust the display to the proper angle prior to use.
1 Turn on the display. (The switch is on the back.)
2 Turn on the ultrasound system.
3 Holding the display with both hands, rotate it forward or backward to the
desired angle. Additional pressure may be required.
Set screw
Figure 5 Adjust the Angle of the External Display
A set screw controls the tightness of the display angle. To avoid damage to the
display, do not adjust the set screw. Turning the set screw loosens the display,
causing the display to drop.