STEP 2: DISCONNECT PROPANE GAS
CYLINDER
See Figure 4.
Open cabinet doors.
Make sure handwheel on the propane gas cylinder is in
its full off position.
Holding coupling nut and regulator as shown, turn coupling
nut counter-clockwise and disconnect by hand. Do not
use tools.
WARNING:
To avoid serious personal injury, always check for gas
leaks any time a gas cylinder is disconnected and then
reconnected.
COUPLING NUT
Fig. 4
REGULATOR
ASSEMBLY
STEP 3: REMOVE THE PROPANE GAS
CYLINDER
See Figure 5.
Turn the cylinder retention bolt counter-clockwise until
the cylinder is loose.
With knees bent and in proper lifting position, carefully
lift the propane gas cylinder up and away from the grill.
NOTE: Do not store gas cylinders not connected for use
in the vicinity of the grill or any other appliance.
Fig. 5
STEP 4: DISCONNECT THE REGULATOR HOSE
See Figure 6.
Using a wrench (not provided), unscrew the collar of
the regulator hose from the propane manifold and valve
assembly located behind the control panel.
Fig. 6
7
REGULATOR
HOSE