Flo 79502 Manual De Instrucciones página 17

PRODUCT CHARACTERISTICS
The grass and shrub shears are a universal and portable tool which does not require an external power source. It is designed for
decorative trimming of grass in places inaccessible to conventional lawn mowers, e.g. near the walls of buildings, fences, around
trees and shrubs, path edges, lawn edges, etc., as well as for cutting small branches and decorative trimming of hedges. The
shears have interchangeable attachments: for grass and hedge trimming. Proper, reliable and safe operation of the power tool
depends on appropriate use, that is why you should:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
The tool is designed for household use only and must not be used professionally, i.e. in workplaces or for paid work. The supplier
shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations specifi ed in
this instructions manual.
EQUIPMENT
The factory packaging should contain shears with a grass trimming attachment, a hedge trimming attachment and a mains
charger. The 79503 model's equipment also includes an adjustable-length holder with a power switch and a base with wheels.
TECHNICAL DATA
Parameter
Catalogue No.
Supply voltage
Max. rotational speed
Max. grass trimming width
Max. hedge trimming width
Max. twig cutting diameter
Insulation class
Protection rating
Noise level
sound pressure L ± K
pA
sound power L ± K
wA
Vibration level
Weight (without attachments)
Battery type
Battery capacity
Battery capacity
Charger
- rated voltage
- rated frequency
- input current
- output voltage
- output current
Charging time
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of
use (including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be
specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this
O R I G I N A L
EN
Unit
[V]
[min -1 ]
[mm]
[mm]
[mm]
[dB(A)]
[dB(A)]
[m/s 2 ]
[kg]
[mAh]
[Wh]
[V~]
[Hz]
[mA]
[VDC]
[A]
[h]
I N S T R U C T I O N S
Value
79502, 79503
3.6
1100
90
120
8
III
IPX1
55.5 ± 3.0
75.5 ± 3.0
0.912 ± 1.5
0.4
Li-Ion
1500
5.4
100 – 240
50/60
300
5.5
1.7
1
17