Flo 79502 Manual De Instrucciones página 18

EN
power tool. Failure to do so may result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and
wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of acci-
dents.
Do not work with power tools in an environment with an increased risk of explosion,
containing fl ammable liquids, gases or vapors. Power tools generate sparks that can
ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of con-
centration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the
plug in any way. Do not use any plug adapters with earthed power tools. An unmodifi ed
plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Ground-
ing the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture.
Water and moisture that gets inside the power tool increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug
the power plug from the power outlet. Avoid contact of the power cable with heat, oils,
sharp edges and moving parts. Damage or entanglement of the power cord increases the
risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work
outside closed rooms. The use of an extension cord adapted for outdoor use reduces the
risk of electric shock.
When using a power tool in a humid environment is unavoidable as a protection
against supply voltage use a residual current device (RCD). The use of RCD reduces
the risk of electric shock.
Personal safety
Stay alert, pay attention to what you do and keep common sense while working with
the power tool. Do not use a power tool when you are tired or under the infl uence of
alcohol or medication. Even a moment of inattention while working can lead to serious
personal injury.
Use personal protective equipment. Always wear eye protection. The use of personal
protective equipment such as dust masks, anti-slip safety shoes, helmets and hearing pro-
tection reduce the risk of serious personal injury.
Prevent accidental operation. Make sure that the electric switch is in the "off " position
O R I G I N A L I N S T R U C T I O N S
18