KlipXtreme Twin Touch KTE-010 Manual página 3

1 Dust-proof mesh
2 Charging case LED indicator: lights up
consecutively in blue indicating that the
device is being charged. Once the fourth
LED indicator is solid blue, the charging case
is fully charged.
3 Charging port: insert the Type C cable in
this port to charge the battery.
4 Built-in microphone: picks up your voice
to enable hands-free calling and conferencing.
Earbuds LED indicator: the LED turns
solid red when charging the earbuds. Once
the earbuds are fully charged, the red lights
turn off.
5 Power/multifunction button: press the
multifunction button to power the earbuds
on and off. Also press this button to start
and pause media and to answer or end an
incoming call.
6 Earbud magnetic contacts: place the left
and right earbuds properly in the charging
case to start charging them.
Multifunction button with LED status
indicators
Multifunction button
Pairing Open the charging case, the earbuds will be
automatically in pairing mode. If not, press and
hold for 4 seconds to go to pairing mode.
Hands-free Press twice to answer and hang up calls. Press
mode and hold for about 2 seconds to reject an
incoming call.
Playback Press twice the right/left multifunction button
mode to play and pause music.
Volume - Press the left button.
Volume + Press the right button.
Previous track Press the left button 3 times.
Next track Press the right button 3 times.
Voice assistant Press 4 times the right/left buttons to give Siri
or Google commands.
LED indicators on earbuds
Charging The LED turns solid red.
Charging The LED turns off.
complete
Power On The LEDs blink in blue and red, then one
earbud's LED indicator blinks red and blue, the
other earbud's LED turns off.
Power Off The LED lights up red, then turns off.
Pairing mode The LED in one earbud turns off and the LED
active in the other earbud blinks blue and red.