GreenWorks G20 Manual Del Operador página 5

EN
1 DESCRIPTION
1.1 PURPOSE
The machine is used to clean vehicles, boats, buildings
by the removal of stubborn dirt with clean water and
chemical detergents.
For domestic use only, not for professional use, and for
operation at temperature above 0°C.
1.2 PRODUCT OVERVIEW
Upper handle
1
Power switch
2
Water outlet
3
Water intlet
4
Spray wand
5
Gun
6
Nozzle lock button
7
Trigger
8
Trigger safety
9
button
2 GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
3 INSTALLATION
3.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If parts of the machine are damaged, do not use
the machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
10 Adjustable nozzle
11 Spray tip cleaning
tool
12 Garden hose
13 High pressure hose
14 Spring button
15 Detergent tank
WARNING
WARNING
WARNING
English
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
3.2 INSTALL THE SPRAY WAND
Figure 2.
1. Push the end of the spray wand into the gun handle.
2. Turn the spray wand clockwise until the tabs lock
into position.
Make sure that the connection has no leakage.
3.3 INSTALL THE WATER INLET
CONNECTOR
Figure 3.
1. Install the water inlet connector onto the water inlet
coupler.
2. Turn the water inlet connector clockwise until it is
tight.
3.4 INSTALL THE UPPER HANDLE
Figure 4.
1. Move the handle into the slots.
2. Put the screws into the holes.
3. Tighten the screws with a phillips head screwdriver
(not included).
3.5 INSTALL THE HIGH PRESSURE
HOSE
Figure 5.
1. Push one end of the high pressure hose into the
inlet coupler.
Pull the spring button to release the high pressure
hose.
2. Install and tighten the other end of the high pressure
hose onto the water outlet coupler.
4 OPERATION
Make sure that all the connections are tight and have
no leakage before operation.
4
WARNING
NOTE
WARNING